Спасибо, о Великий и Ужасный какака.
Цитата:
Hard Reset (PRS-300)
1. Power off the Reader.
2. On the bottom edge of the Reader, using a pin or paper clip, press the RESET button.
3. Turn on the Reader.
4. While the screen displays Opening book... , simultaneously press and hold down the down arrow of the directional button and the 0 button until the Reset All screen is displayed.
NOTE: If Opening book... does not display on the screen, charge the Reader's battery for several hours before
attempting the reset process again.
5. Press the 5 button to reset the Reader.
|
Но вся проблема в том,
что ни шаг 1, ни шаг 2, ни шаг три ни к чему не приводят.
И, соответственно, до пункта 4 я не могу добраться.